Megaflo Service in Kensington by Safe Plumbers

Safe Plumbers Ltd engineers are G3 certified (Registration Number: 918872), allowing us to carry out services on Megaflo unvented storage cylinders in Kensington.

  • 12-month guarantee on Megaflo services
  • 5/5 Google reviews
  • G3 certified
  • Over 100 Megaflo services across Kensington

All our work is carried out by certified gas engineers.

Gas Safe Registered Engineers

Call us on 07979795586

Why choose us for Megaflo service in Kensington

At Safe Plumbers we are certified to work on unvented hot cylinder storage cylinders. We have installed and serviced several Megaflo cylinders across Kensington. Our engineers can carry out any type of service on Megaflo for example: Megaflo Eco, Megaflo Eco Slimline, Megaflo Eco Solar etc.

  • All Megaflo models: Expertise in Unvented Cylinders, Electric Unvented Storage, Immersion Heaters.
  • Local Same-Day Service: Fast response day for Megaflo services in Kensington.
  • First-Time Fix: We can service Megaflo on the same day of visit.
  • No Upfront Costs: You only pay once the service is fully completed to your satisfaction.
  • Transparent Advice: We walk you through the fault and explain all repair options before starting.

Our Megaflo completed jobs in Kensington

Common Megaflo cylinder problems we repair in Kensington

No Hot Water

If the Megaflo cylinder is not heating the water, the issue could be caused by a faulty immersion heater, thermostat, or heating element.

Water Is Not Hot Enough

Unvented cylinder storage heaters warm up through a thermostat. The temperature of the thermostat can be increased so it will heat the water more.

Hot Water Runs Out Quickly

The root cause of this issue can usually be identified easily. If you have a small storage capacity, for example, 100 litres, and the hot water runs out quickly, this is likely due to the amount of water used during a shower. We can measure the water temperature after the cylinder has been heating for a while to verify that it is working correctly.

Low water pressure

This is usually linked to the main cold pressure. We can verify this by turning on a cold tap..

Top questions Kensington residents asks who own a Megaflo cylinder?

Do I need an annual Megaflo service?

Yes, according to Heatrae Sadia, Megaflo storage cylinders require a yearly service. Our qualified G3 engineers can inspect the storage cylinder and ensure it is operating efficiently.

How can I schedule my Megaflo to turn on at a specific time?

Megaflo cylinders do not have a built-in immersion timer. Safe Plumbers can install an immersion timer that lets you schedule the Megaflo to turn on during the night tariff, which may help reduce your electricity bills.

What is the default temperature of the thermostat?

The recommended temperature is generally around 60°C. Note: This can change depending on the model. The maximum temperature may be up to 70°C.

Hot water takes a long time to reach the taps. How can heat loss be reduced?

We recommend wrapping the hot-water pipes with foam pipe lagging.

Do I need a shower pump with my Megaflo?

No, unvented storage cylinders utilise the incoming cold-water mains pressure, so they do not normally require a shower pump like vented storage cylinders. This makes them a more reliable and cost-efficient system.

If you are looking for a Megaflo service near you, Safe Plumbers is always here to help.